Select Connectors

1.Chooes the connectors for your Li-Po Battery

Lipol Battery is manufaturer of Li-Po cells, our cells can also assembled with connectors.The connectors we use are mainly from three famous brand ” Molex”, “JST” and “Hirose”. You can browse the following page to select the connectors you want.

2.Purchase connectors with cables

Our company also sell connectors with cables, you just need to tell us your requirements. Such as connectors part number, crimp terminal, cables length. Then, we’ll give you the assembled-end-use products!

How to choose a connector for lipo batteries?

LiPol Battery Co., Ltd supplies different capacity/size lipo batteries to global customers, our rechargeable lipo batteries are of good quality and are flexible to customize. It’s possible to add a protection circuit module, wires, NTC, and connectors to the lipo battery. Choosing the right connector for a lipo battery is essential to ensure safe and efficient operation of your electronic device or project. Here are some steps to help you select the appropriate connector:

1. Identify Your Device or Application:
Determine what device or project you are powering with the lipo battery. Different applications may require specific connectors based on voltage, current, and physical constraints.

2. Voltage and Current Requirements:
Check the voltage and current requirements of your device or project. The connector you choose should be capable of handling the voltage and current levels without overheating or causing voltage drops.

3.Connector Type:
Common connector types for LiPo batteries include JST connectors, Molex connectors, Hirose connectors, XT60 connectors, and more. Choose a connector type that is compatible with your battery and readily available for your application.

4. Polarity:
Ensure that the connector you select matches the polarity of your LiPo battery. For example JST PHR-2, according to our company’s rules, if pin1 is positive, the polarity/wires sequence is A. Mismatched polarity can damage your device or create safety hazards.

3. Connector Size and Form Factor:
Consider the physical size and form factor of the connector. It should fit comfortably within your device or project enclosure. Some connectors are smaller and more compact, while others may be larger and more robust.

4. Connector Locking Mechanism:
Some connectors come with locking mechanisms that securely hold the connection in place, preventing accidental disconnection. This can be crucial in applications where vibration or movement is a concern.

5. Connector Availability:
Choose a connector that is readily available and easy to source. Common connector types are more likely to be available from various suppliers. Some special connector is very expensive and hard to purchase, we suggest using a common connector.

6. Ease of Assembly:
Consider how easy it is to solder or attach the connector to your LiPo battery and device. Some connectors may require special tools or skills for assembly.

7. Durability and Quality:
Invest in connectors made from high-quality materials to ensure durability and longevity. Cheap or low-quality connectors may wear out or fail prematurely.

8. Connector Compatibility:
Ensure that the connector you choose is compatible with both your LiPo battery and your device or project. Some batteries and devices may have proprietary connectors, so verify compatibility before purchasing.

9. Safety Considerations:
Always prioritize safety. Make sure the connector is rated for the maximum current your application will draw and follow safety guidelines for LiPo battery use.

If you’re uncertain about which connector to choose, consult us for more information, we will recommend the best connector for the lipo battery.

Remember that selecting the right connector is essential for the safe and efficient operation of your LiPo battery-powered devices. Taking the time to research and choose the appropriate connector will help prevent compatibility issues and ensure reliable performance.

Molex 51021-0200 For Li-Po Batteries

Manufacture:       Molex

Part Number:      51021-0200

Appication:          sigle, wire to board or wire to wire

Circuit(Max):       2

Pitch:                    1.25mm(0.049″)

Crimp Terminal: 50058, 50079

Mating wires:      UL1571 28/30/32AWG

Mating Parts:      51047 Crimp Housing, 53047 PCB Header, 53048 PCB Header, 53261 PCB Header, 53398 PCB Header

Link:         http://www.molex.com/molex/products/datasheet.jsp?part=active/0510210200_CRIMP_HOUSINGS.xml

Molex 51021-0300 connector for Li-Po batteries

Manufacture:       Molex

Part Number:      51021-0300

Appication:          sigle, wire to board or wire to wire

Circuit(Max):       3

Pitch:                    1.25mm(0.049″)

Crimp Terminal: 50058, 50079

Mating wires:      UL1571 28/30/32AWG

Mating Parts:      51047 Crimp Housing, 53047 PCB Header, 53048 PCB Header, 53261 PCB Header, 53398 PCB Header

Link:           http://www.molex.com/molex/products/datasheet.jsp?part=active/0510210200_CRIMP_HOUSINGS.xml

Molex 50-37-5023 (5264-02)

It’s a popular connector with pitch 2.5mm and friction lock for wire to board.

Manufacture:       Molex

Part Number:      50-37-5023(5264-02)

Appication:          wire to board,Friction lock connectors

Circuit(Max):       2

Pitch:                    2.50mm(0.098″)

Crimp Terminal: 08-70-1039

Mating wires:      UL1571 22/24/26/28AWG

Mating Parts:      5627 vertical shrouded PCB header, 5268 right angle shrouded PCB header

Link:                 http://www.molex.com/molex/products/datasheet.jsp?part=active/0050375023_CRIMP_HOUSINGS.xml

Molex 50-37-5033(5264-03)

It’s a popular connector with pitch 2.5mm and friction lock for wire to board and NTC/thermister.

Manufacture:       Molex

Part Number:      50-37-5033(5264-03)

Appication:          wire to board,Friction lock connectors

Circuit(Max):       3

Pitch:                    2.50mm(0.098″)

Crimp Terminal: 08-70-1039

Mating wires:      UL1571 22/24/26/28AWG

Mating Parts:      5627 vertical shrouded PCB header, 5268 right angle shrouded PCB header

Link:                 http://www.molex.com/molex/products/datasheet.jsp?part=active/0050375023_CRIMP_HOUSINGS.xml

Molex 78172-0002

It’s a smaller and popular connector with 1.2mm pitch.

Manufacture:       Molex

Part Number:      78172-0002

Appication:          Wire to board housing connector

Circuit(Max):       2

Pitch:                    1.2mm(0.047″)

Crimp Terminal: 78172-0410

Mating wires:      UL007 28/30AWG

Mating Parts:      78171-0002

Link:     http://www.molex.com/pdm_docs/sd/781720002_sd.pdf

Molex 78172-0003

It’s a smaller and popular connector with 1.2mm pitch.

Manufacture:       Molex

Part Number:      78172-0003

Appication:          Wire to board housing connector

Circuit(Max):       3

Pitch:                    1.2mm(0.047″)

Crimp Terminal: 78172-0410

Mating wires:      UL007 28/30AWG

Mating Parts:      78171-0003

Link:     http://www.molex.com/pdm_docs/sd/781720002_sd.pdf

Molex 51047-0200

1.25mm pitch wire to plug housing 51021-0200

Manufacture:       Molex

Part Number:      51047-0200,51047-0300

Appication:          Wire to wire

Circuit(Max):       2 to 10

Pitch:                    1.25mm(0.049″)

Crimp Terminal: 0501258000 & 0501338000

Mating wires:      AWG28, AWG30, AWG32

Mating Parts:      51021-0200, 50121-0300

Link:    http://www.molex.com/molex/products/datasheet.jsp?part=active/0510470200_CRIMP_HOUSINGS.xml

Molex 504051-0401

It’s a smaller hight 2.00mm with 4 circuits connector.

Manufacture:       Molex

Part Number:      504051-0401, 504051-0501, 504051-0601

Appication:          Wire to board header

Circuit(Max):       4 to 12

Pitch:                    1.5mm(0.059″)

Crimp Terminal: 5040520089

Mating wires:      AWG24, 26, 28

Mating Parts:      5040500491, 5040500591, 5040500691

Link:     http://www.molex.com/molex/products/datasheet.jsp?part=active/5040510401_CRIMP_HOUSINGS.xml

Molex 90156

It’s a single row with 2.54mm pitch connector.

Manufacture:       Molex

Part Number:      90156-0142, 90156-0143, 90156-0144, 90156-0145,

Appication:          Wire to board header

Circuit(Max):       2 to 32

Pitch:                    2.54mm(0.0762″)

Crimp Terminal: 0901190109, 0901190110, 0901190111

Mating wires:      AWG22, AWG24

Mating Parts:      90120, 90121, 90136

Link:   http://www.molex.com/molex/products/datasheet.jsp?part=active/0901560145_CRIMP_HOUSINGS.xml

Molex 51004/51065

It’s  another popular connector 2.00mm pitch made by Molex.

Manufacture:       Molex

Part Number:      51004-0200, 51004-0300, 51004-0400

Appication:          Wire to board header

Circuit(Max):       2 to 10

Pitch:                    2.00mm(0.0787″)

Crimp Terminal: 50011

Mating wires:      AWG24, 26, 28,30

Mating Parts:      53253, 53254

Link:   http://www.molex.com/molex/products/datasheet.jsp?part=active/0510650300_CRIMP_HOUSINGS.xml

JST SHR-02V-S-B for LiPo batteries

Manufacture:       JST

Part Number:      SHR-02V-S-B

Appication:          wire to board crimp style connectors

Circuit(Max):       2

Pitch:                    1.00mm(0.039″)

Crimp Terminal: SSH-003T-P0.2H

Mating wires:      UL1571 28/30/32AWG

Mating Parts:      BM02B-SRSS-TB

Link:                  http://www.jst-mfg.com/product/pdf/eng/eSH.pdf

JST SHR-03V-S-B for NTC and Lithium polymer batteries

Manufacture:       JST

Part Number:      SHR-03V-S-B

Appication:          wire to board crimp style connectors

Circuit(Max):       3

Pitch:                    1.00mm(0.039″)

Crimp Terminal: SSH-003T-P0.2-H

Mating wires:      UL1571 28/30/32AWG

Mating Parts:      BM03B-SRSS-TB

Link:                    http://www.jst-mfg.com/product/pdf/eng/eSH.pdf

JST ACHR-02V-S

It’s the smallest connector for connection PCB and lithium polymer battery in a limited space.

Manufacture:       JST

Part Number:      ACHR-02V

Appication:          wire to board crimp style connectors

Circuit(Max):       2

Pitch:                    1.20mm(0.047″)

Crimp Terminal: SACH-003G-P0.2, SACH-003G-P0.2B

Mating wires:      UL1571 28/30/32AWG

Mating Parts:      BM02B-ACHSS-GAN-ETF

Link:                 http://www.jst-mfg.com/product/pdf/eng/eACH.pdf

JST ACHR-03V-S

It’s the best connection solution for connection in narrowapplication.

 

Manufacture:       JST

Part Number:      ACHR-03V-S

Appication:          wire to board crimp style connectors

Circuit(Max):       3

Pitch:                    1.20mm(0.047″)

Crimp Terminal: SACH-003G-P0.2, SACH-003G-P0.2B

Mating wires:      UL1571 28/30/32AWG

Mating Parts:      BM03B-ACHSS-GAN-ETF

Link:                   http://www.jst-mfg.com/product/pdf/eng/eACH.pdf

JST PHR-2

The dimple at the center of the contact ensures positive contact and low contact resistance for lipo batteries at all times.

Manufacture:       JST

Part Number:      PH-2, PHR-2, PH connectors

Appication:          wire to board crimp style connectors

Circuit(Max):       2

Pitch:                    2.0mm(0.078″)

Crimp Terminal: SPH-002T-P0.5S, SPH-002T-P0.5L, SPH-004T-P0.5S

Mating wires:      UL1571 24/26/28/30/32AWG

Mating Parts:      B2B-PH-K-S, S2B-PH-K-S

Link:               http://www.jst-mfg.com/product/pdf/eng/ePH.pdf

JST PHR-3

The dimple at the center of the contact ensures positive contract and low contact resistance for lipo batteries at all times.

Manufacture:       JST

Part Number:      PH-3, PHR-3, PH connector

Appication:          wire to board crimp style connectors

Circuit(Max):       3

Pitch:                    2.0mm(0.078″)

Crimp Terminal: SPH-003T-P0.5S, SPH-003T-P0.5L, SPH-004T-P0.5S

Mating wires:      UL1571 24/26/28/30/32AWG

Mating Parts:      B3B-PH-K-S, S3B-PH-K-S

Link:                  http://www.jst-mfg.com/product/pdf/eng/ePH.pdf

JST XHP-2

It’s high reliablity and versatility for li poly batteries with 2P and clips.

Manufacture:       JST

Part Number:      XH-2, XH connectors

Appication:          wire to board crimp style connectors

Circuit(Max):       2

Pitch:                    2.5mm(0.098″)

Crimp Terminal: SXH-001T-P0.6-N, SXH-001T-P0.6

Mating wires:      AWG#22

Mating Parts:      B2B-XH-A, B2B-XH-2

Link:                http://www.jst-mfg.com/product/pdf/eng/eXH.pdf

JST XHP-3

It’s a high reliablity and versatility for Li-Po batteries with 3P and clips.

Manufacture:       JST

Part Number:      XH-3, XHP-3, XH connectors

Appication:          wire to board crimp style connectors

Circuit(Max):       3

Pitch:                    2.5mm(0.098″)

Crimp Terminal: SXH-001T-P0.6N, SXH-001T-P0.6

Mating wires:      AWG#22

Mating Parts:      B3B-XH-1, B3B-XH-2

Link:                  http://www.jst-mfg.com/product/pdf/eng/eXH.pdf

JST ZHR-2

It’s a also popular connector with 1.5mm pitch.

Manufacture:       JST

Part Number:      ZHR-2

Appication:          Disconnectable crimp style connectors

Circuit(Max):       2

Pitch:                    1.5mm(0.059″)

Crimp Terminal: SZH-002T-P0.5, SZH-003T-P0.5

Mating wires:      UL1571 26/28/30/32/AWG

Mating Parts:      B2B-ZR, S2B-ZR,B2B-ZR-3.4,S2B-ZR-3.4

Link:                http://www.jst-mfg.com/product/pdf/eng/eZH.pdf

JST ZHR-3

It’s a popular connector with 1.5mm pitch.

Manufacture:       JST

Part Number:      ZHR

Appication:          Disconnectable crimp style connectors

Circuit(Max):       3

Pitch:                    1.5mm(0.059″)

Crimp Terminal: SZH-002T-P0.5, SZH-003T-P0.5

Mating wires:      UL1571 26/28/30/32/AWG

Mating Parts:      B3B-ZR, S3B-ZR, B3B-ZR-3.4, S3B-ZR-3.4

Link:                  http://www.jst-mfg.com/product/pdf/eng/eZH.pdf

JST SUR connector

The world’s first 0.8mm pitch wire to board insulation displacement connector is connected li poly battery for wearable.

Manufacture:       JST

Part Number:      02SUR-32S, 03SUR-36L, 03SUR-32S, 03SUR-36L, 04SUR-32S, 04SUR-36L, 05SUR-32S, 05SUR-36L

Appication:          Disconnectable insulation displacement connector

Circuit(Max):       2 to 22

Pitch:                    0.8mm(0.031″)

Crimp Terminal: NO

Mating wires:      UL1007 32/36AWG

Mating Parts:      BM02B-SURS-TF, SM02B-SURS-TF, BM03B-SURS-TF, SM03B-SURS-TF, BM04B-SURS-TF, SM04B-SURS-TF

Link:                 http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf

JST SUHR-02V-S-B

SUH connector have the smallest 0.8mm pitch wire to board insulation displacement connector.

Manufacture:       JST

Part Number:      SUHR-02V-S-B,SUHR-03V-S-B,SUHR-04V-S-B,SUHR-05V-S-B,SUHR-06V-S-B,SUHR-07V-S-B,

Appication:          wire to board

Circuit(Max):       2 to 20

Pitch:                    0.8mm(0.0314″)

Crimp Terminal: SSUH-003T-P0,15, SSUH-0035T-P0.15

Mating wires:      UL1007 28/30/32AWG

Mating Parts:      BM02B-SURS-TF, SM02B-SURS-TF, BM03B-SURS-TF, SM03B-SURS-TF, BM04B-SURS-TF, SM04B-SURS-TF

Link:                http://www.jst-mfg.com/product/pdf/eng/eSUH.pdf

JST SYR-02T/02TY & SYP-02T/02TV-1

It’s a better solution od wire to wire connector with higher current voltage.

Manufacture:       JST

Part Number:      RCY connector, SYR-02T/SYR-02TY, SYR-02T-1/SYR-02TV-1

Appication:          wire to wire connector, crimp style with locking device

Circuit(Max):       2

Pitch:                    2.5mm(0.098″)

Crimp Terminal: SCZH-002T-P0.5

Mating wires:      UL1571 26/28AWG

Mating Parts:      B02B-CZHK-B-1, S02B-CZHK-B-1, BM02B-CZSS-1-TF, SM02B-CZSS-1-TB

Link:                http://www.jst-mfg.com/product/pdf/eng/eRCY.pdf

JST ADHR-03V-H

It’s lower profile type of connector with height 1.9mm. The ultrathin battery series with this connector is using thinner applications.

Manufacture:       JST

Part Number:      ADHR-03V-H

Appication:          wire to board

Circuit(Max):       3&5

Pitch:                    1.3mm(0.0511″)

Crimp Terminal: SADH-002G-P0.2, SAD-003-P0.2

Mating wires:      AWG26,AWG28

Mating Parts:      BM02(3)B-ADHSS-GAN-ETB, BM03B-ADHKS-GAN-ETB,BM05B-ADHKS-GAN-ETB(HF)

Link:               http://www.jst-mfg.com/product/pdf/eng/eADH.pdf

Hirose DF65-3S-1.7C

Low Profile wire-to-board 1.7mm pitch connectors for power supply of Li-Po battery.

Manufacture:       Hirose

Part Number:      DF65-3S-1.7C, DF65-4S-1.7C, DF65-5S-1.7C, DF65-6S-1.7C, DF65-7S-1.7C

Appication:          wire to board

Circuit(Max):       3 to 7

Pitch:                    1.7mm(0.067″)

Crimp Terminal:DF65-2428SCF, DF65-2428SCFA

Mating wires:    AWG24(11*0.16mm),AWG26(7*0.16mm),AWG28(7*0.127mm)

Mating Parts:      DF65-3P-1.7V,DF65-4P-1.7V,DF65-5P-1.7V,DF65-6P-1.7V,DF65-7P-1.7V

Link: https://www.hirose.com/product/en/products/DF65/DF65-3S-1.7C/

Hirose DF13-2S-1.25C/ DF13-3S-1.25C

Pitch miniature crimping 1.25mm popular connector.

 

Manufacture:       Hirose

Part Number:      DF-13-2S-1.25C,DF13-3S-1.25C, DF13-4S-1.25C, DF13-5S-1.25C, DF13-6S-1.25C,DF-13-7S-1.25C

Appication:          wire to board

Circuit(Max):       2 to 15

Pitch:                    1.25mm(0.049″)

Crimp Terminal:DF13-2630SCF, DF13-3032SCFA, DF13-3032SCFA

Mating wires:    AWG26(7*0.16mm),AWG28(7*0.127mm),AWG30(7*0.1mm)

Mating Parts:      DF-13-2P-1.25DSA, DF13-2P-1.25DS, DF13-2P-1.25V, DF13A-2P-1.25H

Link:             https://www.hirose.com/product/en/products/DF13/

Hirose DF52-2P-0.8C

Manufacture:       Hirose

Part Number:      DF52-2P-0.8C, DF52-3P-0.8C, DF52-4P-0.8C, DF52-5P-0.8C, DF52-6P-0.8C, DF52-7P-0.8C,

Appication:          wire to board

Circuit(Max):       2 to 20

Pitch:                    0.8mm(0.0314″)

Crimp Terminal: DF52-2832PCF

Mating wires:    AWG28/30/32

Mating Parts:      DF52-2S-0.8H(21),DF52-3S-0.8H(21),DF52-4S-0.8H(21),DF52-5S-0.8H(21),DF52-6S-0.8H(21)

Link:              https://www.hirose.com/product/en/products/DF52/

How to order rechargeable lipo batteries?

1)Contact us
Send your lipo battery requirement via the sidebar contact form or contact us page. We need to know lipo battery dimensions(thickness x width x length), voltage, capacity, max working current, protection circuit module(PCM), wires request, thermistor(NTC), connector type, etc. The more specific the information, the better we can find the best lipo battery for you.

2. Evaluate & Quotation
When we receive your inquiries, we will reply to you within 12 hours. We will communicate the specific information of the lipo battery via email.

3. Order Process
Once we are agreed on the lipo battery models, quantities, prices, and other details, we will provide you with an invoice for payment. Generally, our payment terms are 100% payment in advance, payment methods are PayPal, credit card, and bank transfer. After we receive the payment, we will arrange your order. The lead time depends on specific orders.

4. Shipment
When the lipo batteries are ready, we will ship them out via DHL/UPS/FedEx Door to Door. We mainly use air shipping to ship the batteries, it is safe and fast. Later, we will provide the tracking number for you. We will also track the orders until the customer signs for the batteries.

5. Warranty
Our warranty for the lipo battery is one year after the sale. (Refund or Resend batteries)
Range of warranty: There is low voltage, expansion, or leakage with the correct use of the cell in the warranty period.

LiPol Battery Co., Ltd

Bldg 4A, JunFeng Industrial Zone, ChongQing Rd, Shenzhen, China
Fill out my online form.